EUROPEAN STANDARDS – EN

In each EU Member State and the EFTA Member State, the tests of the national standards implementing the European Standards are the same. Polish Standard introducing the European Standard is EN-EN, German DIN-EN, etc. This is decisive for the free movement of goods on the European market. As a producer of stages, using our national PN-EN standard, we are confident that by fulfilling its provisions we meet both the EU and EFTA standards. Although compliance with the standards is voluntary, we have made a positive assessment of the compliance of SMS Q-5 for European standards EN-13782 and EN-13814.

EN CERTIFICATE:

FIRE CLASSIFICATION according to EN 13501-1

The fire properties of the individual components are of great importance especially in the first phase of the development of any fire. Their appropriate selection can ensure the safety of people, enabling effective evacuation, and reduce the speed of fire spread and thereby reduce the amount of damage associated with destructive fire action. Fire can spread at a very fast pace, causing huge material losses and endangering people. Hence, fire protection requirements are our top priority.

In the design and production process, we have used the European standard EN 13501-1, which was prepared for the Construction Product Directive 89/106 / EEC, and in particular Interpretation Document No. 2: Fire Safety (OJC62Vol.37). It gives the classification rules common to European Union countries in terms of reaction to fire for all construction products.

FIRE CLASSIFICATION according to EN 13501-1 for SMS Q-5 :

CALCULATION ANALYSIS OF THE STAGE CONSTRUCTION.

Computational analysisis is one of the most important steps towards the verification of the safety of our Mobile Stages. For computational analysis we use professional software from reputable AUTODESK company. Our competent and qualified the designers dimensioned the construction of the scene with the latest EURO CODES. Eurocodes are a set of European Norms defining rules for the design and construction of structural products in force in the Member States of the European Union on the basis of the Harmonization of Documents. Thanks to the analysis of the critical load capacity of the stage construction, we have gained knowledge and our customers have gained huge safety factor.

Calculation analysis of the stage construction Q-5.

CHECKING THE DURABLITY OF STAGES – PRACTICAL METHOD.

In engineering practice there are two types of durablity testing of devices and structures that carry static and dynamic loads.

a) calculation method;
b) a practical method that involves performing load tests.

This publication deals with the second method, which involves performing endurance tests of the stage. In order to prevent the failure of the scene or damage to the equipment due to excessive overload, and to ensure the safety of people, we decided to verify the results of the calculation by a load test.

Assuming that our Q-5 scene should be strong enough to withstand a load greater than the permissible minimum of 150%.. (So-called security factor – 150%) we decided to subject the title stage load tests and prove by the practical method that our product is safe and of the highest quality.

To do the load test we used 972 pieces of concrete blocks with a total weight of 27.2 tonnes..

Detailed documentation for durability test for SMS Q-5

EUROPEAN CERTIFICATE OF APPROVAL.

Our Speed Mobile Stages, according to the EU Framework Directive 2007/46 / EC, have European approval certificate which is required to register the vehicle in any EU country.

Approval is the process by which a new type of vehicle is authorized for road traffic. The approval authority, on the basis of the positive test results of the approved technical unit shall issue the vehicle type-approval certificate authorizing its registration. This certificate confirms the fulfillment of the technical requirements set out in the relevant legislation. European approval is issued in one of the EU Member States in accordance with Directive 2007/46 / EC and is valid throughout the European Union. In other words, a vehicle with a European type approval certificate can be sold and registered in each EU country.

The EC certificate of conformity is issued in the original for each of our trailers with an individual VIN number allowing for the proper identification of each vehicle. Model of the EC certificate of conformity can be downloaded in PDF.

OPERATOR COURSE of SPEED MOBILE STAGE

SpeedMobileStage carries out for all its clients the Operator’s Course of the Speed Mobile Stage for safe and proper use of the mobile stage. The course is free, compulsory and takes about 8 hours. The instructor attests to the completion of the course by the user with a relevant certificate.

THEORETICAL PART:
   Procedures/Safety;

PRACTICAL PART:
Assembly/Disassembly/Usage; 
User Name: estradymnx-Q5_EN

Certificate of completion of the course of the „SMS Q-5 Operator” – example 

SpeedMobileStage guarantees efficient operation of their Speed Mobile Stages for a period of 60 months only if they are used for the intended purpose and the recommendations provided in the manual and the accession to the program of the voluntary periodic checkups „Protect Service” In case of not taking the voluntary periodic checkups „Protect Service” for the purchased mobile stage, the manufacturer provides a 36-month warranty. Detailed terms of GUARANTEE and PROTECT SERVIS are available for download in PDF.

PART CATALOG: Q-5

SpeedMobileStage designs and builds its mobile stage to work for many years. But in the future you may need our help. Therefore always ready – we have a well stocked spare parts in our warehouse. 90% of parts to our mobile stages are at the  our place which significantly shortens the delivery time. For your convenience, we have created the PARTS CATALOG with spare parts and consumables that may be helpful in identifying individual components.

PROTECT SERVICE

The „PROTECT SERVICE” program is a series of periodic, non-mandatory control tests of your stage. The service program is designed to determine the overall security level of mobile stage, the frame, chassis, structure, surface, and sheathing – eg. The effects of wear, bad weather or corrosion, and any changes in the level of safety resulting from repairs carried out or replaced components.Special attention is paid to the running gear, braking systems, suspension, frame construction, screw connections (screws, bolts, bearings), power hydraulics and generally inside the device. Test inspections are voluntary and should be performed every 12 months with the first review is performed after the first 24 months of use. Inspections are documented and performed by the manufacturer.